Autel MX808 VS MK808

Autel MX808 VS MK808: Is There Any Difference?

Are you stuck between the Autel MK808 and Autel MX808 scan tools? Worry not, as this Autel MX808 VS MK808 article will help you select the best automotive diagnostic scanner for your needs.
The Autel MX808 and Maxicom MK808 scanners share similar functions and features, but still, they have a few differences. Read on to learn which scan tool is ideal for your car repair shop or DIYers.

Feature Comparison Chart: Autel MX808 VS MK808

FeaturesAutel MX808Autel MK808
Any Difference?No major DifferencesThe same tool with a Different Name
Works:All 1996 US-based, 2000 EU-based, and newer vehiclesAll 1996 US-based, 2000 EU-based, and newer vehicles
Operating System(OS):Android 4.4.4Android 4.4.4
Processor:Cortex-A9 processor (1.5 GHz)Cortex-A9 processor (1.5 GHz)
Display:7-inch LCD capacitive touch screen with 1024×600 resolution7-inch LCD capacitive touchscreen with 1024×600 resolution
Connectivity:• Mini USB 2.0 • USB 2.0 • Wi-Fi • Micro SD card (supports up to 32GB)• Mini USB 2.0 • USB 2.0 • Wi-Fi • Micro SD card (supports up to 32GB)
Audio Input/Output:• Input: N/A • Output: buzzer• Input: N/A • Output: Beep
Sensors:Ambient light sensor for brightness auto changingAmbient light sensor for brightness auto-adjust power
Power and Battery:3.7 V/3200 mAh lithium-polymer battery,
Charges via 5 VDC power supply
3.7 V/3200 mAh lithium-polymer battery,
Charges via 5 VDC power supply
Tested Battery Life:Around 7 hours of continuous useAround 4.5 hours of continuous use
Power Consumption:600 mA (LCD on with default brightness, Wi-Fi on) @3.7 V500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V
Battery Charging Input:5 V/1.5 A5 V/1.5 A
Operating Temp:-10 to 60°C(14 to 140°F)0 to 55°C(14 to 131°F)
Storage Temp:-20 to 70°C (-4 to 158°F)-20 to 60°C (-4 to 140°F)
Operating Humidity:5% – 95% non-condensing5% – 95% non-condensing
Read/Clear Codes:YesYes
Auto VIN Detection:YesYes
Display live data in text:YesYes
Support IMMO(Anti-theft matching) Functions:YesYes
Oil Reset, EPB, BMS, SAS, DPF, ENG/AT/ABS/SRS Codes:YesYes
Tire Pressure Monitoring System (TPMS):YesYes
Basic TPMS Service, ABS Bleeding, Injector Coding, Suspension Calibration, steering angle sensor calibration:YesYes
Freeze Frame Data:YesYes
battery registration and reset:YesYes
I/M Readiness:YesYes
Live Data:YesYes
Check Engine Light:YesYes
Vehicle Coverage:Acura, Audi, Bentley, BMW, Bugatti, Benz,
Chevrolet, Holden, Buford, Chrysler, Gm, Ford, Honda,
Hyundai, Land Rover, Isuzu, Infiniti, Kia, Jaguar,
Mitsubishi, Nissan, Mazda, Lexus, Maybach, Mini,
Skoda, Saab, Porsche, Seat, Scion, Smart, Opel,
Sprinter, Subaru, Volvo, Vauxhall, Suzuki, Toyota, VW, etc.
Acura, Audi, BMW, Bugatti, Benz, Buford, Bentley,
Chevrolet, Chrysler, Gm, Holden, Ford, Honda,
Hyundai, Land Rover, Kia, Isuzu, Infiniti, Jaguar,
Lexus, Mitsubishi, Mini, Maybach, Nissan, Mazda,
Opel, Seat, Skoda, Porsche, Saab, Scion, Smart,
Sprinter, Subaru, Vauxhall, Volvo, Suzuki, Toyota, VW, etc.
Weight:885 g (2.31 lb.)788 g (2.42 lb.)
Dimensions (W x H x D):270.8mm(10.0) X176.0mm(6.9) x36.0mm(1.4)237.8 mm (9.4”) x 148.6 mm (5.9”) x 35.5 mm (1.4”)
Software Update:One Year12-month free software updates
Warranty:One Year WarrantyOne-Year Limited Warranty
Price:Autel MX808 VS MK808Check PriceAutel mk808 vs mx808Check Price

Main Features of the Autel MK808 and MX808 Diagnostic Scanner

Page Contents

Autel Maxicheck Maxicom MX808 OBD II diagnostic scan tool

The Autel Maxicheck Maxicom OBD2 scan tool is an Android version of the Autel MD802 diagnostic code reader. It features a 5 feet extension 16pin cable for easy maneuvering during reading or erasing of error codes. The large 7-inch LCD capacitive touch screen displays clear results with a high 1024×600 resolution. It has an Android 4.4.4 operating system with the cortex-A9 processor. This makes the device to be extremely fast and easy to navigate.

Related Comparison: Difference Between Autel DS808 and MK808

Additionally, the MX808 scan tool is powered by a 3.7 V/3200 mAh lithium-polymer battery. This battery provides an excellent run time of 4.5 hours of continuous use. There are many ways through which you can connect this device, such as using the mini USB cable, Wi-Fi connectivity, USB, and the Micro SD card. The gadget has the ability to support up to 32GB. With Wi-Fi, you can as well update this scanner as it comes with free one-year updates. With greater compatibility and a wide range of functions, an MX808 scan tool is a great tool for beginners and car enthusiasts.

difference between autel mx808 and mk808Check Today’s Price


  • Large color touchscreen for easy use
  • Compatible with most OBD2-compliant vehicles manufactured from 1996 and newer
  • Fast and powerful processor for exceptional performance
  • Performs a wide range of functions
  • Large storage capacity


  • It has to be charged
  • Offers limited functions

Autel MaxiCOM MK808 automotive OBD II scan tool

The Autel Maxicom MK808 automotive diagnostic scanner is a combination of the Maxicheck pro and MD802 all-systems scanners. It has the ability to perform a wide range of functions such as basic OBD2 functions, special functions, and advanced functions like support auto bleed test and IMMO functions. Moreover, this scanner is compatible with more than 80 US, European, and Asian vehicle makes manufactured from 1996 and newer.

Related OBD2 Comparison: Autel Maxidas DS808 VS Autel Maxisys MS906

It features a large 7-inch LCD capacitive touchscreen with 1024×600 resolution for easy reading of results on display. It is also fast and powerful, thanks to its Android 4.4.4, newer vehicle operating system, and the Cortex-A9 processor.  In addition, it has an audio output that helps the user not to miss the results when the light conditions are not favorable. Just like the MX808 scanner, this code reader also comes with a 3.7 V/3200 mAh lithium-polymer battery with a runtime of 4.5 hours of continuous use. It can as well be updated for free and has a one-year limited warranty.

Features Comparison autel maxicom mk808 and mx808Check Today’s Price


  • Easy-to-use interface
  • Fast and powerful
  • Sleek and compact design
  • Performs a wide range of functions
  • Extensive vehicle coverage of over 80 vehicle makes and models
  • 1-year warranty and 1-year free online update


  • You will be required to charge the battery
  • Provides limited functions

Related Comparison Article: Autel Maxisys MS906 VS MS908

Decision Between Autel MK808 VS MX808 scanners

Even though these two diagnostic scanners come with similar functions and features, they still differ slightly. First of all, the Autel MX808 scanner is lighter than the Autel MK808 scan tool. So, if you’re looking for a portable and reliable diagnostic code reader, then the MX808 automotive scan tool is the best choice. Secondly, the MX808 is slightly smaller in size as it measures 15 x 11.6 x 4.8 inches, compared to MK808, which measures 15 x 11.7 x 4.7 inches.

In short, if you want a reliable tool for your auto repair shop, then the Autel MaxiCom MK808 is the best tool for you.

Conclusion: Which Autel is better, MX808 or MK808?

The final decision when it comes to selecting either the Autel MX808 scan tool or the Autel MK808 scanner lies in the type of work you’re going to perform. If you want a scanner for your auto repair shop, then the MK808 scan tool is the best for you. But if you do repairs in your garage or are a car enthusiast who moves around more often, then the lighter MX808 diagnostic scanner will be the best for you.

Related Comparison: Autel Elite VS Pro


  • What’s the difference between Autel Maxicom MK808 and MX808 scanners?

These scan tools have the same hardware and functions. Nevertheless, if I were to select between the two, then I would go for the Autel MK808 scan tool due to its stability and reliability in performance.

  • Which of the two (Autel MK808 and MX808) is more portable?

If you’re stuck between these two scanners, as they have similar features and functions, but want a more portable gadget than the two, then the Autel MX808 scan tool is the best choice for you. It weighs 2.3 pounds, which is lighter than the Autel MK808’s 5.91 pounds.

  • Can Autel’s MX808 program keys?

Yes, both the Autel MX808 and MK808 perform key programming.

  • How to use Autel mx808? (Video)

  • What is the difference between Autel mx808 and mk808?

There is no major difference. Minor differences exist in battery, runtime, modes, and weight.

  • Can an Autel MX808 program a 2nd generation Murano fob?

Yes, it supports key programming for the Nissan Murano.

  • Can Autel’s MX808 read OBD1?

Yes, the scanner supports both OBD1 and OBD2 protocols.

  • Does the Autel Maxicheck mx808 do brake bleeding?

Yes, this device can perform ABS bleeding.

  • Is the Autel MX808 better than the DS808?

Autel Maxidas DS808 is more advanced, but you need to spend more.

  • Are the Autel MX808 and MK808 bidirectional scanners?

Yes, they are one of the most affordable bidirectional OBD2 scanners available on the market.

  • How to print data from the Autel MX808/MK808 scanner?

-Make sure you have an Internet or LAN connection.
-Go to the MaxiCheck job menu and click on the “Print” button.
-Tap “Print This Page” to copy a screenshot or “Print All Page” to copy a PDF.
-A temporary file will be sent to the PC for printing.
-You will get a confirmation message when the data is transferred.

  • How to update the Autel MK808 scanner?

You can enable the auto-update option to get the latest OS version when the device is connected to WiFi or the internet. Just follow these steps:

Go to Job Menu→Settings→Auto Update→ON→Set Time→Done

It will update the device’s OS automatically.

Still, have a question after reading this Autel Maxicheck mx808 vs. Maxicom mk808 article. Comment below.

56 thoughts on “Autel MX808 VS MK808: Is There Any Difference?”

  1. gilbert villarido

    is this mx,mk808 compatible with deisel engine like nissan navarra,toyota innova and isuzu dmax

    1. Henry L. Wilburn

      You can install any android app. But, you cannot do that directly through MK808. You need to download APK VIA Laptop/PC, then transfer it to the device(MX808/MK808) and install it.

  2. Hello Henry
    I contacted Autel customer service about that
    And the Mx808 it are specific for North Amerique
    And MK are for European car
    For my i need work on Mecedes Sprinter from canada
    You thinks what?

  3. Henry, since these scanners are basically the same units, why is the MK808 so much heavier? Seams if they are the same the weights would be much more in line with each other.

  4. Can I scan for chassis codes on a 2001 Lincoln Town Car with this? My Air Suspension light is on and I can’t obtain the Ford scanner

  5. I have a 2015 Ford F350 Diesel truck and I am looking at the MX808 and Mk808. Which one would you recommend to do a (DPF) Manual Regen and can both program keys?

  6. Does it allow one to set cam shaft retard plus or minus , on order to help set up my new distributor shaft i put in my 96 suburban

  7. Want to buy a scanner that has a 38-pin adapter for Mercedes Benz. I’ve heard on the Benz forums that I need this adapter for resetting codes in the Trans Control Module after replacing the conductor plate on the 722.6 auto transmission. I know Autel sells these as part of a kit, but I can’t find any retailers they recommend which stock or can get the adapter by itself. Do you know any vendors that sell this part?

  8. Holy moly, what a bad job on this article. Halfway through and the only difference I can see is one beeps and the other buzzes. Very interested in the Autel scanners but i am giving up on this article to define any difference in these 2 models.

  9. Hello, can MX808 calibrate a blind spot sensor ? I saw a Youtube video where a MS908 does that, thanks for your time, regards.

  10. Hello, for the two cars (1) Chevy Captiva 2012, 2.4L petrol 4 Cylinders, VIN KL1CA26U1CB078747. (2) Ford Mondeo 2012, 2.0L Ecoboost Turbo, VIN WF0DXXGBBDDE02697. Is MK808/MX808 working on these 2 cars? Thanks.

  11. Hello, I have two cars with different issues. I have 2013 Nissan Altima that has Air Bag light that stays on constantly. I need to get this corrected before the car can be inspected.

    Next, I replaced the battery about 3 month ago in the 2007 Cadillac SRX. Soon after that, I went to have the car inspected but three sensors showed “not ready”. The state of Texas will allow “only one sensor to show not ready”. All the people at these inspection places just tell you to just to drive the car. I put over 500 mile on the car driving in the city and on the highway. I’ve run two tanks full of gasoline and paid $50 for two separate inspections. Three months later, I still have two sensors showed “not ready”. They are the “Catalyst” and the “Evap”. I’ve never had a “Check Engine” or any fault codes on this car because the car only has 34,000 miles on the odometer.

    Will the MK808 help me figure out why the sensors are not working and how to address the Air Bag light? Or do you recommend a different Autel Diagnostic tool

  12. can the mx808 help to unlock rear calipers when changing rear brake pads and register a new battery when changing a battery for 2020 lincoln continental and a 2017 audi a6

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to Top